BXJJM - EAS-6AF PART B, EAS-6
- MSDS: BXJJM
- Manufacturer: QCM CO
- Product Name: EAS-6AF PART B, EAS-6
- National Stock Number: 8010-00N059297
Product Identification
Product ID:EAS-6AF PART B, EAS-6
MSDS Date:11/10/1991
FSC:8010
NIIN:00N059297
MSDS Number: BXJJM
Responsible Party
KENT, WA 98032
US
Emergency Phone: 800-424-9300(CHEMTREC)
Info Phone: 206-859-0933
Preparer: ROY WHEELDON
Cage: 0L872
Contractor
Telephone: 206-859-0933
Cage: 0L872
Ingredients
PIPERAZINE,1-(2-AMINOETHYL)-; (NAEP)
CAS: 140-31-8
RTECS: TK8050000
Fraction By Weight: 15.1%
NONYL PHENOL
CAS: 84832-15-3
Fraction By Weight: 33.8%
CARBON BLACK
CAS: 1333-86-4
RTECS: FF5800000
Fraction By Weight: 0.15%
OSHA PEL 3.5 MG/M3
ACGIH TLV: 3.5 MG/M3
TALC(POWDER), CONTAINING NO ASBESTOS FIBERS; (TALC/SILICA)
CAS: 14806-96-6
RTECS: WW2710000
Fraction By Weight: 50.3%
OSHA PEL 3.5 MG/M3
ACGIH TLV: 3.5 MG/M3
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EXCESS CONTACT WITH SKIN CAUSES BURNS.
CONTACT WITH EYES IRRITATING. REPEATED SKIN CONTACT MAY CAUSE
SENSITIZATION AND SKIN RASH.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:EYE: FLUSH W/WATER FOR AT LEAST 15 MINUTES. CONSULT MD. SKIN:
WASH W/SOAP & WATER. FLUSH W/WATER. REMOVE CONTAMD CLTHG & SHOES.
INHAL: REMOVE TO FRESH AIR. CONSULT MD. INGEST: CONSULT MD.
Fire Fighting
Flash Point Method:TCC
Flash Point:300F,149C
Extinguishing Media:CARBON DIOXIDE OR DRY CHEMICAL FOR SMALL FIRES. USE
ALCOHOL TYPE FOAM & WATER FOR LARGE FIRES.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP.
Unusual Fire/Explosion Hazard:NONE.
Accidental Release
Spill Release Procedures:FLUSH SMALL SPILLS W/PLENTY OF WATER. LARGE
SPILLS: COLLECT FOR DISPOSAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:DO NOT GET IN EYES, ON SKIN OR
CLOTHING. AVOID BREATHING VAPOR. KEEP CONTAINER CLOSED WHEN NOT IN
USE & STORE BETWEEN 50-90F.
Other Precautions:WASH SKIN AFTER HANDLING. WASH CLTHG BEFORE RE-USE.
Exposure Controls
Respiratory Protection:NIOSH/MSHA APPROVED AIR SUPPLIED MASK IN
CONFINED AREAS.
Ventilation:LOCAL EXHST: PREFERRED. MECHANICAL: ACCEPTABLE.
Protective Gloves:PVC, RUBBER GLOVES.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGS.
Other Protective Equipment:EMERGENCY EYEWASH & DELUGE SHOWER MEETING
ANSI DESIGN CRITERIA.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.
Chemical Properties
Spec Gravity:1.43 (H*2O=1)
Evaporation Rate & Reference:14%
Appearance and Odor:BLACK PASTE W/AMMONICAL ODOR.
Stability
Stability Indicator/Materials to Avoid:YES
AVOID CONTACT WITH STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:AVOID TEMPERATURES ABOVE 320C.
Hazardous Decomposition Products:MAY PRODUCE NITROGEN OXIDES, CO*2 OR
CO.
Disposal
Waste Disposal Methods:INCINERATE IN A FURNACE WHERE PERMITTED UNDER
APPROPRIATE LOCAL, STATE & FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.